DIMENSIONAL ACCURACY OF PROTOTYPES MADE WITH FDM TECHNOLOGY

  • Davor Tomić Karlovac University of Applied Sciences, Department of Mechanical Engineering
  • Ana Fudurić Karlovac University of Applied Sciences, Department of Mechanical Engineering
  • Tihomir Mihalić Karlovac University of Applied Sciences, Department of Mechanical Engineering
  • Nikola Šimunić Karlovac University of Applied Sciences, Department of Mechanical Engineering
Keywords: additive technology, 3D printing, 3D scanning, fused deposition modelling

Abstract

Under the term “additive manufacturing”, commonly known as 3D printing, we distinguish various methods of manufacturing technologies. Common to all these processes is manufacturing a model
layer by layer from a digital form. The aim of this paper is to experimentally determine which material provides dimensionally more accurate prototypes on a Fused Deposition Modelling (FDM) additive machine. Acrylonitrile Butadiene Styrene (ABS) and PolyLactic Acid (PLA) materials were used. The di- mensional accuracy was checked by comparing the Computer-Aided Design (CAD) model with each of ten models obtained by the method of 3D scanning. The results show that prototypes manufactured from PLA are dimensionally more accurate those made from ABS.

Downloads

Download data is not yet available.

References

http://en.wikipedia.org/wiki/Fused_deposition_modeling (08.01.2017)

T.M. Wang, J.T. Xi, Y. Jin: A model research for prototype warp deformation in the FDM process, International Journal of Advanced Manufacturing Technology, Vol. 33, p.p. 1087–1096, (2007). Available: http://link.springer.com/article/10.1007/s00170-006- 0556-9 (09.01.2017)

L. Novakova-Marcincinova, I. Kuric: Basic and Advanced Materials for Fused Deposition Modeling Rapid Prototyping Technology, Manufacturing and Industrial Engineering, Vol.11, Iss. 1, p.p.24 – 27, (2012). Available: http://www.fvt.tuke.sk/journal/pdf12/1-pp-24-27.pdf (10.01.2017)

A. Bellini, S. Güçeri: Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyping Journal, Vol. 9, Iss. 4, p.p. 252 – 264, (2003). Available: http://www.emeraldinsight.com/doi/abs/10.1108/13552540310489631(10.01.2017)

O. Lužanin, D. Movrin, M. Plančak: Effect of layer thickness, deposition angle, and infillon maximum flexural force in FDM-built specimens, Journal for Tech Plast, Vol. 39, Iss.1, p.p. 49 – 58, (2014). Available: http://www.dpm.ftn.uns.ac.rs/JTP/Download/2014/1/Article6.pdf (10.01.2017)

A. Bagsik, V. Schöppner, E. Klemp: FDM Part Quality Manufactured with Ultem9085,14th International Scientific Conference on Polymeric Materials 2010, Halle (Saale). Available:

http://usglobalimages.stratasys.com/Main/Files/FDM%20Test%20Reports/FDM%20Part%20Quality%20Manufactured%20with%20Ultem.pdf?v=634600740797547038 (10.01.2017)

Published
2024-02-09
How to Cite
Tomić D., Fudurić A., Mihalić T., & Šimunić N. (2024). DIMENSIONAL ACCURACY OF PROTOTYPES MADE WITH FDM TECHNOLOGY. Journal of Energy Technology, 10(2), 51-59. https://doi.org/10.18690/jet.10.2.51-59.2017
Section
Articles